Code setting instructions

How to Change a Lockbox Combination on any Model 5000 Series
.
  
Step 1   
Open the lockbox by simply dialing in the correct combination. If you have forgotten the combination, the code cannot be reset!
Note: All new lockboxes come preset to 0-0-0-0. 
Step 2 
Once you dial in the correct code, place your hand on the shackle. With your other hand place your fingers on the sides of the lock box and open just like an oven door.
 
Step 3
 
To reset the combination, you will need to find the reset pin which is located inside in the lock box. If your pin is equipped with a rubber boot, be sure to remove it before attempting to move the pin. 
 
Step 4 
Slide the reset pin to the right and up. If reset pin doesn't move, go back and dial the correct combination. If you have forgotten the combination, you will not be able to reset the code! 
Step 5 
Ensure your lock box is open when you reset the combination. 
Step 6 
Dial in your new combination. Write down the new combination for future reference.
Step 7 
After you dial in your new combination slide the reset pin back down and to the left.
Step 8 
If your pin came equipped with a rubber boot, you will need to replace it once you have moved the pin back to its starting position. This will ensure the pin does not move. 
Step 9 
To open the shackle simply slide the release lever and pull up on the shackle. 
Step 10 
You are now ready to place your lock box on a door.
 
Step 11 
Once your lockbox is secure on the door remember to dial the combination to an alternate setting.

 

 

How to Change the Lockbox Combination for the 5500 Model Series
.
Step 1 
Open the lockbox by simply dialing in the correct combination. 

Note: All new lockboxes come preset to 0-0-0-0. 
Step 2 

Once opened, reset pin to the right and hold it down. Be sure to keep the lockbox open during the following steps. 

Step 3 

Continue to hold in the pin while setting the new combination. When completed, release the pin. 

Step 4 

Check to see if the shackle opens. Once it does, place the lockbox on the door handle. Secure the lock box and change to an alternate setting. The locking shackle will allow you to control the placement and movement of your lockbox allowing others to access the keys or security card located inside without being able to remove the lockbox.